亚洲三区在线观看无套内射,无码专区天天躁天天躁在线,自拍 偷拍 日韩,自拍欧美一区二区

High quality hydraulic equipment manufacturers!
TELL:+8613184968882

tailplate hydraulic cylinder Sold to Peru

Release time:2023-11-07 17:47:45 Hits: Current position: Home > News

This article mainly introduces:

Peru hydraulic cylinder,tailplate hydraulic cylinder manufacturer,tailplate hydraulic cylinder

Peru tailplate hydraulic cylinder

(Peru tailplate hydraulic cylinder,produced by Hebei Hengyu company)

tailplate hydraulic cylinder are widely used in Peru,because of clever hydraulic energy conversion,simple structure and reliable operation,excellent temperature resistance.So our company has designed tailplate hydraulic cylinder for customers from Peru.

Introduction to tailplate hydraulic cylinder:

When the tailplate hydraulic cylinder is in use, once the seal and guide support ring are found to be defective, the seal with the same structural form and appropriate material should be replaced according to the structural form of the tailplate hydraulic cylinder seal to be repaired, so as to minimize the thickness of the oil film between the seal and the sealing surface and reduce the leakage of the seal.

tailplate hydraulic cylinder and hydraulic station selection: Select the type and structure of the tailplate hydraulic cylinder according to the operation requirements of the main engine. According to the external load force borne by the tailplate hydraulic cylinder, such as gravity, friction force of the external mechanism, inertia force and working load, determine the load change law of the tailplate hydraulic cylinder in each stage of the stroke and the power value that must be provided. Determine the diameter of the piston and piston rod according to the working load of the tailplate hydraulic cylinder and the selected oil working pressure. the flow rate of the hydraulic pump is determined according to the movement speed of the tailplate hydraulic cylinder, the diameter of the piston and the piston rod.

When the tailplate hydraulic cylinder is in use, measures should be added to prevent the intrusion of pollutants. Effective measures should be taken to control the intrusion of pollutants, such as installing high-efficiency air filters in the tank breathing holes, new oil must be filtered, etc., but also must improve the anti-pollution ability of the tailplate hydraulic cylinder itself. In the seriously polluted environment, it is more important to pay attention to, such as the underground oil tailplate hydraulic cylinder should use fluorine rubber (FRM) and nitrile rubber (NBR) dust ring, and the ground mechanical tailplate hydraulic cylinder should use nitrile rubber dust ring; The filter device is added to the oil inlet of the tailplate hydraulic cylinder of the dump truck, construction machinery, work platform and other equipment, and in order to reduce the oil inlet resistance, the flow area should be increased as much as possible, which can effectively reduce the particle pollution from the system.

The tailplate hydraulic cylinder is not the same as the tailplate hydraulic cylinder, because the pressure of the pneumatic system is generally within the range of 0.2-1.0Mpa, the tailplate hydraulic cylinder can not be used as a high-power power component, but the tailplate hydraulic cylinder can be used as a relatively large power component, or the tailplate hydraulic cylinder system can be used.

Answers to some questions about tailplate hydraulic cylinder:

Does the excavator use a hydraulic cylinder?
First, construction machinery is generally a hydraulic cylinder. Second, hydraulic transmission equipment is usually composed of four components, power, execution, control and auxiliary. And the hydraulic cylinder as a linear reciprocating motion or less than 360. Reciprocating motion of the hydraulic mechanism, simple structure, reliable work, is also widely used in the hydraulic system of the main actuator, it is the prime mover in the form of mechanical energy to drive the hydraulic pump produced by the liquid pressure energy, and then can be directly driven load for reciprocating movement or less than 360.

What is the safety factor of 25MPa cylinder wall thickness?
Safety factor n can take 3 cylinder material allowable stress [s]=sb/n δ/D=0.08 ~ 0.3 cylinder wall thickness δ=PMAX*D/ (2.3[s]-3PMAX) δ/D≤0.08 cylinder wall thickness δ=PMAX*D/2[s] P < 16MPa, Pmax=1.5Pn; P > 16MPa, Pmax=1.25Pn cold-drawn tube or honing tube is better!

Back to list Recommended article

Leave a message if you have any questions.

Send
Email

Email:hsslrubbertech@gmail.com7x24 hours

Glad to receive your consultation!:

Service
Tel

+8613184968882
7x24hours service

Add
Wechat

Add Wechat
TOP
丁香五月婷婷中文字幕色| 人妻交换三级片电影| AV毛片一区二区青青草| 精品福利无码| 摸逼小视频| 日韩欧美成人网站分享| 日本a级日本a级一二级不卡| 日韩精品少妇一区二区在线看| 海外黄色吃瓜在线视频| 三级免费揉| 精品一区二区三区最新网址| 国产精品高潮网站| 婷婷操高潮高清| 夫妇交换中出一区二区| 国产av激情影院| 大香蕉日AV久久日| 在线毛片| 欧美啪啪无码| 国产免费午夜在线电影| 臀视频一区二区在线| 久久久久入穴| 亚洲色欲亚洲色欲亚洲色欲| 欧美国产精品在线| 美妻中文精品在线| 殴美女YYXX黑人XX黑人| 大肉棒插进去一出一进视频| 色婷婷精品色情综合网站| 亚洲自拍偷拍找片| 久久久久久久黑少妇| 亚洲色丝袜开心网播放| 国产精品久久久久久无卡不卡| 日韩精品一区 porn| 亚洲在线观看av| 2024AV亚洲天堂在线观看| 日本无码全黄二区三区大片免费看| 久久久久亚洲熟妇| 无码一道本亚洲日韩| 丝袜AV在线网址| 贵阳熟女a级一区二区三区| 日本一二三四区不卡在线观看| 99国产精品就|