亚洲三区在线观看无套内射,无码专区天天躁天天躁在线,自拍 偷拍 日韩,自拍欧美一区二区

High quality hydraulic equipment manufacturers!
TELL:+8613184968882

rack cylinder Sold to Angola

Release time:2023-11-13 11:19:26 Hits: Current position: Home > News

This article mainly introduces:

Angola hydraulic cylinder,rack cylinder manufacturer,rack cylinder

Angola rack cylinder

(Angola rack cylinder,produced by Hengyu Group)

rack cylinder are widely used in Angola,because of clever hydraulic energy conversion,simple structure and reliable operation,excellent temperature resistance.So our company has designed rack cylinder for customers from Angola.

Introduction to rack cylinder:

The advantages and disadvantages of the rack cylinder: the surface of the rack cylinder by painting, coating protection treatment, bright luster is not easy to rust, all raw materials of the rack cylinder through the top heat treatment, high manufacturing precision, belongs to the precision machinery, has a simple structure, stable quality, high mechanical efficiency, easy to achieve automation and many other advantages. However, hydraulic technology also has the shortcomings of oil leakage, oil temperature change affecting the control of running speed, noise, expensive cost and high maintenance cost.

When the rack cylinder is installed, it is necessary to ensure that the direction of the connecting head at the top of the piston rod should be consistent with the direction of the rack cylinder head, earring (or middle hinge shaft), and ensure the straightness of the whole piston rod during the advance and return process to prevent rigid interference and cause unnecessary damage.

rack cylinder to reasonable use of hydraulic oil: strict hydraulic oil selection off. Hydraulic oil is selected in strict accordance with oil standards. The selection of good quality hydraulic oil can effectively prevent bubbles in the working process of the hydraulic system. When choosing the oil, it should be selected according to the lowest temperature in different regions, and fill the hydraulic oil according to the dipstick standard, and at the same time, it should also keep the hydraulic system clean (when filling the hydraulic oil, it should prevent the water and other impurities into it), and often check the oil quality, oil level and oil color of the hydraulic oil. If blisters and bubbles are found in the hydraulic oil. When the oil becomes milky white, the source of the air in the oil should be carefully found and eliminated in time.

How the cavitation of the rack cylinder is formed: With the gradual rise of pressure, the gas in the oil will become bubbles, when the pressure rises to a certain limit value, these bubbles will break under the action of high pressure, so that the high temperature and high pressure gas will quickly act on the surface of the parts, resulting in cavitation of the rack cylinder, resulting in corrosive damage to the parts.

Answers to some questions about rack cylinder:

How to repair if hydraulic shears cylinder oil leakage?
The hydraulic cylinder is generally disassembled and the sealing ring is replaced. There are generally two ways to install the ends of the hydraulic cylinder. The larger hydraulic cylinder is mostly flanged disc type, which is screwed to the middle cylinder block by several bolts, the bolts are removed, and the cylinder head is slowly pulled out. The smaller hydraulic cylinder, the cylinder block and the head itself are threaded, and the rotating end cap can be removed from the cylinder block. If you do not understand the hydraulic cylinder, it is best to ask someone to deal with it. It is easy to damage the sealing ring and internal surface during disassembly.

What is the reason for the hydraulic cylinder sticking out and not retracting?
There are two reasons: First, the problem with the seal, if there are two seals on the piston, the top seal is broken. Second, when the hydraulic pressure itself is designed, the rod cavity area is too small, so that the desired return force can not be achieved during the return trip. You can first check whether the coupling is damaged; Then see if the relief valve in the oil line block is blocked. If the use time is too long, it needs to be cleaned, the hydraulic oil is very dirty and can block oil block. Electromagnetic directional valves can also be checked, but the chance of problems is relatively small, unless there is a product problem.

Back to list Recommended article

Leave a message if you have any questions.

Send
Email

Email:hsslrubbertech@gmail.com7x24 hours

Glad to receive your consultation!:

Service
Tel

+8613184968882
7x24hours service

Add
Wechat

Add Wechat
TOP
超碰日韩有码| 日本啪啪成人免费| 国产久久牛牛一二三区| 亚洲色在线v中文字幕蜜桃一区| 国产精品久久不卡一区| 日本有码视频不卡| 大香萑少妇| 99re国| 午夜少妇福利| 丰满少妇性交换| 久久黄色美女操B| 国产欧美日韩成人看片| 91社麻豆| 亚洲国产字幕| 国产白虎骚女粉嫩在线| 狠狠撸牛成人电影一区二区 | 午夜福利com| 大香蕉一伊| 亚洲人妻午夜电影院| 国产AV美国AV| 欧美可以自己看的黄片| 成人涩99| 不卡无码小视频| 国产午夜福利在线视频免费观看| 久久久久久囯精品色费色费s☆ | 国产精品图色| a午夜福利日本| 亚洲成人乱码一区二区三区在线| 丰满的少妇一区二区三区| 老鸭窝最新网址免费在线观看视频 | 无码毛片视频一区二区免费播放| 天堂色亚洲一区二区| 婷婷色格五月天av| 在线中文字幕亚洲日韩/中文字幕 亚洲视频无码无线再现 | 夜夜操一区| 久久夜影院| 大骚逼骚视频| 天天插天天日天天透天天操| 成人久久麻豆五月天麻豆五月天| 日B视频免费送| 日本三级黄色片,大鸡巴猛插|