亚洲三区在线观看无套内射,无码专区天天躁天天躁在线,自拍 偷拍 日韩,自拍欧美一区二区

High quality hydraulic equipment manufacturers!
TELL:+8613184968882

flying wing compartment hydraulic cylinder Sold to Dominica

Release time:2023-11-23 08:22:45 Hits: Current position: Home > News

This article mainly introduces:

Dominica hydraulic cylinder,flying wing compartment hydraulic cylinder manufacturer,flying wing compartment hydraulic cylinder

Dominica flying wing compartment hydraulic cylinder

(Dominica flying wing compartment hydraulic cylinder,produced by Hebei Hengyu company)

flying wing compartment hydraulic cylinder are widely used in Dominica,because of clever hydraulic energy conversion,simple structure and reliable operation,excellent temperature resistance.So our company has designed flying wing compartment hydraulic cylinder for customers from Dominica.

Introduction to flying wing compartment hydraulic cylinder:

The pressure of the sliding surface of the flying wing compartment hydraulic cylinder piston is too large, resulting in sintering. The piston tilts due to the weight of the piston rod, resulting in the phenomenon of non-stiffness, or the pressure of the sliding surface of the piston rises due to the action of the transverse load, which will cause sintering. In the design of the flying wing compartment hydraulic cylinder must study its working conditions, the length of the piston and bushing and the size of the clearance must be fully paid attention to.

When the flying wing compartment hydraulic cylinder is kept, do not pay attention to keeping the oil port open, which will produce the condition of accepting foreign bodies at all times, which is absolutely not allowed. Storage must be filled with anti-rust oil or working oil, and plug.

The machining accuracy of the flying wing compartment hydraulic cylinder depends on the level of equipment, production technology and testing means. flying wing compartment hydraulic cylinder processing methods are commonly used in two ways, one is rough boring - fine boring - rolling, generally with 45# seamless steel pipe, this method of processing quality is good, but the cost is high. Another method is to use 20# cold-drawn seamless steel pipe, and then honing, the cost is lower. The piston rod must be adjusted and straightened before processing, and the coating thickness of the piston rod is generally not less than 0.03mm. The piston must be machined in strict accordance with the groove size and tolerance requirements given in the seal manual.

The quality of the flying wing compartment hydraulic cylinder can not be ignored in the purchase of the flying wing compartment hydraulic cylinder. The flying wing compartment hydraulic cylinder is the main component of the flying wing compartment hydraulic cylinder, the single pillar for mining, the hydraulic support, the gun tube and other products, and its processing quality directly affects the life and reliability of the entire product. flying wing compartment hydraulic cylinder processing requirements are high, its internal surface roughness requirements are Ra0.4 ~ 0.8μm, the coaxiality, wear resistance requirements are strict. The basic feature of flying wing compartment hydraulic cylinder is deep hole processing, which has always troubled the processing personnel.

Answers to some questions about flying wing compartment hydraulic cylinder:

What are the main dimensions of the cylinder?
The main dimensions of the cylinder include: cylinder inner diameter, piston cylinder diameter, cylinder length, cylinder wall thickness, stroke, installation distance, etc.

How to achieve hydraulic cylinder self-locking?
Hydraulic cylinder self-locking is divided into oil self-locking and mechanical self-locking. The oil self-locking is equipped with a valve to maintain pressure, so that the hydraulic oil of the cylinder does not return to the tank, and the oil chamber of the cylinder is filled with a certain pressure of oil. However, this pressure holding self-locking is not very safe and reliable, and the plunger will slowly return if there is a leak. Mechanical self-locking is to install a nut on the plunger of the cylinder, and when the cylinder rises to the required position, the nut on the cylinder plunger is rotated to the end, and the cylinder block is in contact, so that the plunger will be fixed to the required height. When it is necessary to relieve the pressure, screw the nut on again and let the plunger return to the position. This kind of cylinder has a special name, called self-locking hydraulic cylinder.

Back to list Recommended article

Leave a message if you have any questions.

Send
Email

Email:hsslrubbertech@gmail.com7x24 hours

Glad to receive your consultation!:

Service
Tel

+8613184968882
7x24hours service

Add
Wechat

Add Wechat
TOP
日韩无码精品少妇| 在线视频 SM大咪咪| 少妇高潮精品叫久久久| 国产欧美日韩精品久久国产成人| 天堂成人国产精品在线视频| 日韩国精产品三级| 久久6久久| 国产精品美女久久| 日本无码人妻在线一区二区| 亚洲熟妇中文字幕系列| 高清影院一区| 欧美性爱日朝精品| 色AV日韩精品| 久久天堂成人| 骚逼想要大鸡巴操av| 九九中文视频播放| 亚欧成人网站在线| 午夜福利精品中文| 激情av区| 久色中文| 欧美日韩黄一级中文字幕| 草逼一区无码视频| 日韩精品视频卡一| 美女张开腿让男人来操视频免费 | 成人97在| 欧美资源一区| www.国产91| 天天看天天摸天天操BB| 天堂A√久久| 欧美日韩在线3| 91老熟妇视频| 午夜专区| AAA久久日韩无码| 美女写真视频一区二区三区四区五区| 亚洲 图片 日韩 欧美| 日韩伦理在线国产偷拍| 欧美视频 亚洲视频| 白丝美女色情强奸视频| 午夜福利男视频| 精品二区二区三区| 91狠狠色丁香婷婷|